MEMO 9 FUNCTION indicates the EPROM version and the JRC serial number.
"J1" RS-232 FUNCTION displayed your personals parameters on the RS-232.
5 IF FILERS SELECTION NARR, INTER, WIDE, >12 KHz, AUX.
"B4" RS-232 FUNCTION to use 12 KHz filter with RS-232 interface (read/write instruction).
11 TUNING STEPS
by pressing the RUN, DOWN and UP keys :
STEP :
10 Hz
1 KHz
5 KHz
6,25 KHz
8,33 KHz or 9 KHz
(*)
12,5 KHz
15 KHz
25 KHz
x10 (RUN):
100 Hz
10 KHz
50 KHz
(*) 8,33 KHz or 9 KHz.
The speed rotation of the central tuning knob is proportional for the 10 Hz and 100 Hz fine steps, as before.
The speed is linear for the 9 others steps.
The central tuning knob, the DOWN/UP keys and SWEEP function works with the same tuning steps, in all modes.
With a first pressing on the RUN key, the actual tuning step is indicated on the display as below:
- -. 1 2.5 0 KHz (for 12,50 KHz step)
By pressing the DOWN or UP keys, you can decrease or increase the tuning step.
This step display is cleared when you turn the tuning knob or if you press the FREQ, CHANNEL, CLR, MODE, CLOCK, SCAN or SWEEP key.